Tandem–quadro linear units for industrial applications

Benefits

Fastest way to a linear slide design
Ready to use without extra efforts
Low friction energy saving slide solution

Features

Solutions in compact and standard range
Available with double lip low friction seals
Factory pre-lubricated and ready for use

Tandem and specific quadro units are the easiest way to build up a linear slide. Only a flat surface is needed for the installation all other tolerance are already incorporated into the Quadro design. Please contact us for more information about our linear bearings product range!

Technical Data

Overview

Speed	up to 5 m/s
Acceleration	up to 100 m/s2
Operating temperature	-20 to +80 °C
Diameter range	from 8 to 50 mm
Dynamic load rating C	up to 35 500 N
Static load rating Co	up to 49 000 N

Types

LTBR

LTBR

Compact tandem unit in closed design with two self-holding LBBR bearings (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing .

LTDR

LTDR

Compact duo unit in closed design with two LBBR bearings (ISO series 1) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LQBR

LQBR

Compact quadro unit in closed design with four LBBR bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LTCD

LTCD

Standard tandem unit in closed design with two self aligning LBCD bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LTCR

LTCR

Standard tandem unit in closed design with two rigid LBCR bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LTCF

LTCF

Standard tandem unit in open design with two self-aligning LBCF bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LTCT

LTCT

Standard tandem unit in open design with two rigid LBCT bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LQCD

LQCD

Standard quadro unit in closed design with four self-aligning LBCD bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LQCR

LQCR

Standard quadro unit in closed design with four rigid LBCR bearings (ISO series 3) from 8 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

LQCF

LQCF

Standard quadro unit in open design with four self-aligning LBCF bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded or stainless steel.

LQCT

LQCT

Standard quadro unit in open design with four rigid LBCT bearings (ISO series 3) from 12 to 50 mm shaft size. Variants: sealed, shielded, stainless steel or plain bearing.

2D / 3D

For product orders, please refer to our catalogue pages where the ordering keys are indicated. Please do not use the ordering keys generated here as they may be incomplete.

Publications